AFMG Network Forum
AFMG Network Forum Index -> EASE 4 -> Acoustic Design Guideline for venue
Post new topic  This topic is locked: you cannot edit posts or make replies. View previous topic :: View next topic 
Acoustic Design Guideline for venue
PostPosted: Mon Dec 19, 2011 9:40 am Reply with quote
melmadni
Member
 
Joined: 14 Nov 2009
Posts: 8
Location: jeddah




Kindly , can one give me advice about prison unit with the following characteristics: 19.90m width, 41.9m length, 7.47m height and Volume of 5062.99m3.and • the finishing materials of the surfaces are considered as the following: 1. The ceiling is Rough Concrete. 2. The floor is Rough Concrete. 3. The wall is Rough Concrete.
4.The Architectural openings covered with Steel .
•The assumed noise level is 65dB. - Audience area level at 1.5m.
•The assumed humidity level is 60%. - All Calculations to be done at, 1000Hz. We used 9 line array speakers TOA but the result is very bad intelligibility also considered The customer did not allow active treatments or use acoustical materials the RT is 4.62 second at 1KHZ.
Please give me solutions for this issue .
thans.
modather
Kindly , can one give me advice about prison unit with the following characteristics: 19.90m width, 41.9m length, 7.47m height and Volume of 5062.99m3.and • the finishing materials of the surfaces are considered as the following: 1. The ceiling is Rough Concrete. 2. The floor is Rough Concrete. 3. The wall is Rough Concrete.
4.The Architectural openings covered with Steel .
•The assumed noise level is 65dB. - Audience area level at 1.5m.
•The assumed humidity level is 60%. - All Calculations to be done at, 1000Hz. We used 9 line array speakers TOA but the result is very bad intelligibility also considered The customer did not allow active treatments or use acoustical materials the RT is 4.62 second at 1KHZ.
Please give me solutions for this issue .
thans.
modather

http://www.imagehosting.com/photo/photo/listForContributor?screenName=1vtcl7trvo6r9&rss=yes&xn_auth=no

_________________
deasa
View user's profile Send private message Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
PostPosted: Mon Dec 19, 2011 10:53 am Reply with quote
AFMG Pedro Lima
Forum Moderator
 
Joined: 05 Jun 2010
Posts: 269
Location: Germany




Dear user,

Please avoid duplicated posts, staying focused in the original post at http://afmg-network.com/viewtopic.php?t=1288

Best Regards,
View user's profile Send private message
AFMG Network Forum Index -> EASE 4
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  This topic is locked: you cannot edit posts or make replies.  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG